Making your own maple syrup

Tue. Mar. 23, 2021

Click below to listen to my 2 min. Garden Bite radio show: Making your own maple syrup

As promised… a primer on making your own Maple Syrup.  It IS an adventure.  It’s time consuming but the flavor can’t be beat.

Boiling down maple syrup

You can make your own taps from 3/8 inch pvc pipe about 5 inches long. Or buy them.  Tap into your trees about 3 feet up and at an upward angle.

homemade taps for maple syrup
  • He made his own taps from 3/8 inch pvc pipe about 5 inches long.
  • Tapping into the trees about 3 feet up and at an upward angle.
  • Using clean gallon water jugs for collecting the sap he used clear ½ inch pvc tubing to connect the tap and the collector bottle by drilling a hole in the center of the cap.
  • He used fallen maple branches from his yard to build the fire, placing old pallets around the fire to shield it from the wind.
  • He confiscated the pan from my Nesco roaster oven to boil the sap, setting it on unused bricks from another project.
  • Instructions from the MN DNR on tapping trees
  • Roth Sugar Bush tapping supplies
  • Tapping supplies – Lehman’s
bag with tap

It took about 6 hours to boil down 7 gallons of sap into the tastiest Maple Syrup I’ve ever had the chance to sample! Once the sap reaches the boiling point, you need to monitor it very carefully so it doesn’t burn.

The Lakeville maple syrup making adventure

The finished point of maple syrup is when it has reached 7 degrees above the temperature of boiling water.  This varies with elevation and weather. He then used coffee filters to strain the syrup. He got about 20 ounces of grade A amber syrup. It smelled like cotton candy and smoke!

Ah, what a wonderful smell and every drop was a reminder of the day he boiled it down outside. The wind blowing, the smell of the fire and cotton candy.  The syrup had a smoky flavor to it too, which I really liked.

Enjoy!!